Shaanxi wantong automation equipment Co.,Ltd

Date: 18th July 2016
Dywer Series PE & TE Orifice Plate Flowmeters
Welcome to purchase discount source dywer series pe & te orifice plate flowmeters from our company, which is one of the best China dywer series pe & te orifice plate flowmeters manufacturers and suppliers.The Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets. Unlike a standard orifice plate, the Series PE is a true primary element including the various components for differential pressure measurement. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. The Series PE is available in line sizes from 1/2" to 24" and used for air and most gases. It meets or exceeds ASME, AGA & ISO standards.The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges (orifice flanges are not required). The Series TE was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.Product Applications??? ?Fluid flow rates in building water lines??? ?Boiler feedwater??? ?Cooling water??? ?Combustion or compressed air??? ?Steam flowSpecificationsService: ? PE: ? Clean air and compatible gases; TE: Compatible gases and liquids.Wetted Material:Monolithic (single piece) constructed ? entirely of gray PVC for PE or white PTPE for TE, Buna-N gaskets.Accuracy:?0.6% full scale flow. (Beta= .2-.6) ?0.7% ? for Beta greater than .6.Temperature Limits: ? PE: ? 140?F (60?C) max; TE: -40 to 200?F (-40 to 93.3?C).Pressure???????? Limits:150 psi (10 bar) maxHead Loss:1 - Beta ratio?, eg: 1 - 07? = 1 - 0.49 = 51% ? of the d.p.Line Sizes: ? 1/2" ? to 24".Process Connections: ? 1/4" ? female NPT.Installation:Standard flange 125#/150# rating.Pipe Requirements:General requirements 10 diameter upstream and ? 5 diameter downstream.Weight:Varies ? with line size. See Catalog page.
Images
Latest News
Contact Information
Phone:
86-029-87892227
Fax:

86-029-87882940

Address:

Address: Room 903, 6th Building, Huachengpojun, 10 Chang'An S Rd, Yanta District, Xi'An, Shaanxi 710061, China
XiAn, 710061

Website:

www.wtindustrialeqpt.com

Contact Form